CHMBM - SOLDERING KIT,7022-0011-02

  • MSDS: CHMBM
  • Manufacturer: PACE INC
  • Product Name: SOLDERING KIT,7022-0011-02
  • National Stock Number: 3439-00-260-7719
Product Identification

Product ID:SOLDERING KIT,7022-0011-02
MSDS Date:08/03/1998
FSC:3439
NIIN:00-260-7719
Kit Part:Y
MSDS Number: CHMBM

Responsible Party
PACE INC
9893 BREWERS COURT
LAUREL, MD 20707-1990
US

Emergency Phone: 301-490-9860

Info Phone: 301-490-9860

Preparer: DOD HMIS/DSCR-VBA

Cage: 17794

Contractor
PACE INC
LAUREL, MD 20707-1990 US

Telephone: 301-490-9860

Cage: 17794

Ingredients

LEAD (SARA 313) (CERCLA)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.15MG/M3 DUST; 9495

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

LD50 LC50 Mixture:NONE KNOWN.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:HEALTH HAZARDS ARE BASED ON ACTUALLY
SOLDERING. ACUTE: EYES:IRRITATION FROM SMOKE AND
FUMES.SKIN:IRRITATION BY CONTACT WITH FUMES.INHALATION:FUMES MAY
CAUSE IRRITATION AND DAMAGE OF MUCOUS MEMBRANES A ND RESPIRATORY
SYSTEM.INGESTION:NOT LIKELY TO OCCUR.CHRONIC:REPEATED INGESTION OF
LEAD CAN RESULT IN SYSTEMIC POISONING.
Explanation of Carcinogenicity:IARC LISTS LEAD AS 2A CARCINOGEN," AGENT
IS PROBABLY CARCINOGENIC TO HUMANS".
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION. INHALATION:
IRRITATION AND DAMAGE OF MUCOUS MEMBRANES AND RESPIRATORY SYSTEM.
INGESTION: INGESTION OF LEAD CAN RESULT IN SYSTEMIC POISONING.
Medical Cond Aggravated by Exposure:SOLDERING FUMES MAY AGGRAVATE
PRE-EXISTING CONDITIONS OF THE LUNGS, DISEASES OF THE BLOOD AND
BLOOD-FORMING ORGANS, KIDNEYS, NERVES, AND POSSIBLY REPRODUCTION
SYSTEM.

First Aid

First Aid:EYES: FOR BURNS FLUSH WITH COOL WATER. GET MEDICAL ATTENTION.
FOR FUME IRRITATION, MOVE FROM EXPOSURE. USE EYE DROPS. GET MEDICAL
ATTENTION IF SYMPTOMS PERSISTS. INHALATION: MOVE TO FRESH AIR. GET
MED ICAL ATTENTION IF NEEDED. INGESTION: IFSYMPTOMS OF SYSTEMIC
POISONING FROM LEAD DEVELOP, GET MEDICAL ATTENTION.

Fire Fighting

Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:NORMAL FIRE FIGHTING PROCEDURES APPLICABLE FOR
SURROUNDING FIRE.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:MELTED SOLDER WILL SOLIDIFY ON COOLING AND CAN
BE SCRAPED UP.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:AVOID BREATHING SMOKE/FUMES GENERATED
DURING SOLDERING.
Other Precautions:WASH HANDS AFTER HANDLING SOLDER CONTAINING LEAD
BEFORE EATING OR SMOKING.

Exposure Controls

Respiratory Protection:NONE NORMALLY REQUIRED. WHEN VENTILATION IS NOT
SUFFICIENT TO REMOVE FUMES FROM BREATHING ZONE, A CARTRIDGE TYPE
RESPIRATOR SHOULD BE WORN.
Ventilation:PROVIDE ADEQUATE EXHAUST VENTILATION (GENERAL AND/OR LOCAL)
WHEN SOLDERING TO MEET TLV REQUIREMENTS.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:WHEN SOLDERING,SAFETY GLASSES OR GOGGLES
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH HANDS AFTER HANDLING SOLDER CONTAINING
LEAD BEFORE EATING, DRINKING, OR SMOKING.
Supplemental Safety and Health
THE SOLDERING KIT IS NON-HAZARDOUS. THE HEALTH HAZARDS ARE BASED ON
SMOKE AND FUMES GENERATED DURING SOLDERING.

Chemical Properties

HCC:N1
Appearance and Odor:KIT CONTAINING SOLDERING TOOL, PRINTED CIRCUIT
BOARD, COIL OF SOLDER, FLAT PACK

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NORMAL SOLDERING DECOMPOSITION
PRODUCTS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:SOLDER CAN BE RECLAIMED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.